| Equipment Synchronous Belts Drive Belts
Manual: Multifunctional Building MachineV-Belts,For building and cutting of raw edge V-belts,synchronous belts and poly-v belts, buildingand grinding of rubber sleeve, Controled by PLC and industrial touching screen with dynamic parameter display and fully automatic operation
Belt length: 500-2500mm
Building drum length: 1000mm
Cutting drum length: 1220mmTiming
Cord laying pitch: 1-6mm
Cord tension: 10-80N
Error of cord tension:+or-2N |
 |
Manual: Grinding Machine For Poly-V Belts,For grinding poly-v belts.Controled by PLC and industrial touching screen with dynamic parameter disp.
Belt length:600-2500mm
Size of belts:PJ PK PL
Grinding width:max50mm
central power:11Kw |
 |
Manual: Grinding Machine For Synchronous Belts,For grinding synchronous belts,precision exactly,efficiency high. Controled by PLC and industrial touching screen with dynamic parameter disp.
Belt length:450-5000mm
Belt width:400-1000mm
Grinding precision:¡À0.1mm(in 1000mm) |
 |
Manual: Measuring Machine for Synchronous Belts,For measuring length and printing table of measuring data and it's error, Controlled by PLC and industrial controllingcomputer with dynamic parameter display and fully automatic operation
Belt length:500-2500mm
Measuring speed:120r/min
Measuring tension:20-800N
Measuring error:+or-0.05mm |
 |
Manual: Test Machine for V-belts,For testing tiredness of V-belts and poly-v belts.
Test power:15kW
Slip:max4%
Belt span. Tension:10-900N
Belt length:800-2500mm
RPM driving shaft:4700-4900r/min |
 |
Manual: Rubber Cover Vulcanized Po,For curing raw edge V-belts synchronous belts and poly-v belts.Controlled by PLC and industrial touching screen with dynamic parameter display and fully automatic operation. Opening¡¢closing and locking of door with hydraulic system.
Inside diameter:2000mm
Working pressure:1.4MPa
Working temperature:197.4¡æ
Maximum diameter of belts:1600mm |
 |
Manual: Stripper for Synchronous Belts,For stripping synchronous belts after being cured and ground.
Stripping range:%d150-760mm
Stripping speed: 2m/min
Working pressure:16MPa
|
 |
Manual: Building Machine for V-Belts,For building raw edge V-belts,synchronous belts and poly-v belts,finishing operating such as cordlaying.rubber sheet building. etc.Controlled by PLC and industrial touching screen,and parameter is dynamic displayed.
Belt length: 500-2500mm
Cord laying speed:160m/min
Cord laying pitch:1-6mm/r
Cord tension:10-80N
Error of cord tension:+or-2N |
 |
Manual: Synchronous Belt Moulding Machine,For building synchronous belts V-belts and poly-v belts, finishing operating such as cord laying rubber sheet building.Controlled by PLC and industrial touching screen, and parameter is dynamic displayed.Dual position cord tension unit and four station rubber sheet let-off device.
Belt length: 2000 - 5000mm
Cord laying speed: 160 m/min
Cord laying pitch: 1 - 10 mm/r
Cord tension: 40 - 200N
Error of cord tension: +or-3N |
 |
|
| Last Updated on Friday, 18 March 2011 16:58 |
English
Arabic
French
German
Portuguese
Russian
Spanish
Belarusian
